PRODUCTS
Products
YAW-300C microcomputer controlled bending and compression tester
Brand
HESON
Model
YAW-300C
Specifications
Applications
Transaction customer
Selection guide
YAW-300C hydraulic flexural and compressive testing machine
Product introduction
is mainly used for compressive and flexural strength tests of brick, stone, cement, concrete and other building materials, as well as mechanical properties tests of other materials, meeting the standards of GB/T2611, GB/T17671, GB/T16826 and GB/T50081.
The product description
structure: the equipment (see the attached drawing) is composed of oil cylinder (folding resistance, compression resistance), piston (folding resistance, compression resistance), force sensor, pressure plate, light bar, upper beam, folding resistance device, compression fixture, oil tank, oil pump and motor, valve plate group, controller, etc.
control system: load in hydraulic way, using the electro-hydraulic servo technology of cement, concrete and other material rated experiment was carried out under the force of compression test, can be carried out in accordance with the corresponding standard loading rate setting and control indicators meet the standard load rate, load, time and test curve of dynamic display and control function and the biggest test the force function in a timely manner.
safety protection device: when the test force exceeds 3% of the maximum test force, overload protection and oil pump motor stop.
Technical indicators
Product model | HS-YAW-300C |
Maximum test pressure | 300kN |
Maximum bending test force | 10kN |
The control mode | The computer automatically controls the loading process |
Grade of accuracy | level.1 |
Measuring range of test force | 4%-100%FS |
Accuracy of test force indication | Better than±1% |
Resolution of test force | 0.01kN |
Loading rate | 0.3kn /S ~ 10KN/S (compression) 50N/ S (folding) |
Hydraulic pump rated pressure | 25MPa |
Compression piston stroke | 80mm |
Piston travel | 60 mm |
The piston diameter | φ130mm |
Compressive compression space | 180mm |
Flexural compression space | 180mm |
Maximum distance between two columns | 180mm |
The pressure plate size | Ф120mm |
Main engine dimensions | 1200×600×1300 mm |
The host power supply | 1.5Kw/AC380V |
The weight of the | 540kg |
Host standard configuration
A complete electro-hydraulic servo pressure testing machine
Lenovo commercial computer (18.5 "LCD)
An HP inkjet printer
One set of special measurement and control system for testing machine;
A set of special control software for test machine under Windows operating environment.
One set of upper and lower pressure plates
A set of materials such as specifications and certificates
A set of special compression jig for cement
A set of cement fracture resistant devices